Lake Country 5" Dual-Action Flexible Backing Plate
Minimize heat transfer, flexes to hug your vehicle’s curves, and are built to last. And they are the best backing plates you can buy for the Porter Cable 7424 Or Porter Cable 7336 Dual-Action Polishers
Conventional foam pads absorb polish too quickly. This reduces polish and pad performance because most of the polish is trapped below the working surface of the pad. CCS technology™ solves this common problem using stategic patterns of partially closed foam cells.
Benefits:
SLOW RATE OF POLISH ABSORBTION - Enhances polish performance.
IMPROVES OPERATOR CONTROL - CCS pockets gradually release polish as needed by the operator.
PREVENTS PAD SKIPPING - CCS pockets reduce surface tension allowing operator to run pad flat on working surface.
CREATES LESS HEAT - CCS pockets reduce surface contact resulting in less friction generated heat.
Patented nanofoam process encapsulates the base of the lambswool fibers with microscopic polyfoam particles.
Benefits:
PERFORMANCE - Cuts like natural sheepskin but finishes like a foam pad. Aggresively removes P1500 grit scratches, leaving a lustrous finish with no hazing by reducing compounding swirls.
DENSE BODY - Foamed fibers resist caking and matting.Foaming process also creates minute air pockets at the base of the fibers, which improves cushioning and retention of compounds and polishes.
CONSISTENT QUALITY - Manufacuring process produces a uniform material, resulting in consistent pad performance ... unlike performance reducing variances that can occur with naturla sheepskin pads.
MINIMAL LINTING - Foaming process locks in the lambswool fibers, significantly reducing linting.
APPEARANCE - Distictive color for easy identification.
The 2 7/8 inch backing plate screws directly onto any circular polisher with a 5/8 inch diameter shaft. Use 4 inch pads, 3.5 inch pads, or Cyclo 4 inch pad with this backing plate. Note: Adapter LC-46-230DA will be needed to use with a DA polisher.
The Lake Country D.A. adapter allows your dual action polisher to accept a rotary backing plate. The adapter works with any of our rotary backing plates.